RTV silicone sealant one-component silicone adhesive e-liquid silicone rubber

Description636 series are single component silicone rubber, oxime removal type, with the advantages of high elongation, excellent toughness, neutral and non-corrosive, good insulation performance, moisture-proof, shock resistant, corona resistant and anti leakage of electricity. They have good adhesion to metals and most of plas

Featured Products

Description
636 series are single component silicone rubber, oxime removal type, with the advantages of high elongation, excellent toughness, neutral and non-corrosive, good insulation performance, moisture-proof, shock resistant, corona resistant and anti leakage of electricity. They have good adhesion to metals and most of plastic, also with excellent resistance to cold and hot cycle performance after curing (-50---250ºC).
 
Application
Adhesion to engineering plastics, metals, glass and ceramic objects.
Used in bonding & positioning electronic components on circuit boards, strengthening and mechanical bonding and sealing.

Technical Data
IndicatorsSpecification
Before CuringSpecific Gravity (g/cm³, 25ºC) 1.0-1.7
Surface Curing Time (min, 25ºC)≤30
After CuringMechanical PropertiesTensile Strength (Mpa)≥1.5
Elongation (%)≥300
Shear Strength (Mpa)≥1.5
Durometer (Shore A)15-60
Electrical PropertiesDielectric Constant (50Hz)3.0
Dielectric Strength (KV/mm)≥18
Volume Resistivity (Ω.cm)≥1x1015
Operating Temperature Range (ºC)-50---250

How to Use
Clean surface: clean the bonding surface
Application: cut outlet nozzle, extrude silicone rubber by glue gun, coating evenly immediately, then attach bonding surface
Curing: cured at room temperature in air

Packing
2600ml/pc, 4pcs/carton

300ml/pc, 24pcs/carton
100ml/pc, 50pcs/carton or 100pcs/carton

Remark

The above information is based on our extensive experiments, results are reliable. However, because practical application is varied, we can't control the application condition, users need to confirm whether the product is suitable by testing before mass production. Our company aren't responsible for any direct, indirect or accidental loss when the products are used in specific condition. If user have any problem with our products, please contact with our technical service department, we will try our best to offer the most possible help.

Our Policy
1. Sample: Sample is free for our valuable customer.

2. OEM: OEM service is provided for our valuable customer.
3. Welcome to visit our factory anytime.
4. Welcome to be our brand "TBL" distributor in your local place.

Our Exhibition Information

RTV Silicon Sealant One Component Silicone Adhesive Electronic Liquid Silikon Rubber


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours