Product Description:
3+3 type cheap RTV silicone gasket maker, with or without 2g super glue
Characteristics:
one-component, fast cure, good thixotropy, easy to inject, high-classified red rtv silicone gasket maker/adhesive. it can make almost any gasket instantly by replacing mostly cut gaskets without causing metal corrosion. no dripping on elevation coating, and no shrinkage after cured. Also,it can tolerant the high temperature up to 320°c and has excellent resistance of oil, water, and transmission fluid.
Technical data sheet:
We can customize 25g, 32g and 35g packing in blister card depend on your request.
Applications:
Sealing and anti-shaking of engines, valve cages, bonnets and other mechanical parts in cars, motorcycles, farming machines, also, seal in high-temp fields, like in machinery, electronic, chemicals, and hardware, etc.
User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease
2. Remove the cap, puncture inner seal of the tube, screw on nozzle with a desired size
3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. or completely surround all bolt holes
4. Wait about 10 minutes for glue to skin over. Then reassemble the parts
5. Gasket maker dries to touch in 1 hour and allow to bond after 24 hour fully curing.
Notes:
1. Clean the assembled parts by removing the oil and grease.
2. it will release some acid odor when assemble the parts, so using in an adequate ventilated place.
3. Screw the nozzle tightly after using in order to avoid its curing inside the tube
4.Keep away from children.
3+3 type cheap RTV silicone gasket maker, with or without 2g super glue
Characteristics:
one-component, fast cure, good thixotropy, easy to inject, high-classified red rtv silicone gasket maker/adhesive. it can make almost any gasket instantly by replacing mostly cut gaskets without causing metal corrosion. no dripping on elevation coating, and no shrinkage after cured. Also,it can tolerant the high temperature up to 320°c and has excellent resistance of oil, water, and transmission fluid.
Technical data sheet:
| Description | Acetoxy, Neutral |
| Appearance | Paste |
| Specific Gravity ( g/cm3) | 1.05~1.10 |
| Skin time( min) T: 22°C, R.H.: 40% ~ 60% | 3~5 |
| Tack free time(min) T: 22°C, R.H.: 40% ~ 60% | 20 |
| Cure Rate (mm) T: 22°C, R.H.: 40% ~ 60% | 4.0 |
| Hardness(shore A) | >35 |
| Elongation, % | >200 |
| Tensile Strength, N/mm2 | >2.10 |
| Lifespan | 1 year |
| Color | Blue, black, red, grey, white and clear |
| Packing | 35g, 55g, 85g, 100g and 310ml |
| Working Temperature | -60°C to 320°C |
| Packing type | 85g/card, 120pcs/carton. Carton size: 46x28x44 cm |
| 100g/card, 120pcs/carton. Carton size: 46x28x44 cm |
We can customize 25g, 32g and 35g packing in blister card depend on your request.
Applications:
Sealing and anti-shaking of engines, valve cages, bonnets and other mechanical parts in cars, motorcycles, farming machines, also, seal in high-temp fields, like in machinery, electronic, chemicals, and hardware, etc.
User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease
2. Remove the cap, puncture inner seal of the tube, screw on nozzle with a desired size
3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. or completely surround all bolt holes
4. Wait about 10 minutes for glue to skin over. Then reassemble the parts
5. Gasket maker dries to touch in 1 hour and allow to bond after 24 hour fully curing.
Notes:
1. Clean the assembled parts by removing the oil and grease.
2. it will release some acid odor when assemble the parts, so using in an adequate ventilated place.
3. Screw the nozzle tightly after using in order to avoid its curing inside the tube
4.Keep away from children.