High Grade Acetoxy Silicone Sealant with General Purpose(C-363)
Characteristics:
1. One component
2. Fast acid curing, high strength
3. Non-discoloring.
4. Excellent adhesive for Aluminum doors and windows and most building materials..
5. Excellent resistance to low and high temperature, little performance changes between -10 ºC~120 ºC
Application:
1.Joint sealing of Aluminum doors and windows
2. Joint sealing for day lighting roof construction and great glass
3. Joint sealing for high-grade glass assembling.
4. General joint and seal
Limitations:
1. Cannot be used as structural sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Cannot be used on the substrate surface below 6ºC or above 40 ºC
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water,go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Color available:
White, grey, transparent, others of special order
Curing Time:
Track-free Time is between 5 to 15 minutes at room temperature
Completely curing Time is between 24 hours to 72 hours at room temperature.
Packaging:
Cartridge: 300 ml 24 cartridges/ctn
Gross weight: 340g Net weight: 280g
Storage and transportation:
12 months stored in a dry and ventilated place below 27ºC in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB/T 14683-2003
TECHNICAL DATA SHEET
| No | Item | The standard | Test result | ||
| 1 | Appearance | Have no grain, no agglomerations, no skinning, no bubble. | Pass the standard | ||
| 2 | Density (g/cm3) | ±0.1 | 0.940 | ||
| 3 | Droop degree (mm) | Uprightness | ≤3 | 0 | |
| Level | No damage | No damage | |||
| 4 | Skinning time (h) | ≤3 | 0.2 | ||
| 5 | Elastic recovery ratio ( %) | ≥80 | 98 | ||
| 6 | Extrusion ability, ml/min | ≥80 | 105 | ||
| 7 | Tensile modulus (Mpa) | 23ºC | ≤ 0.4 | 0.36 | |
| 8 | Cold-hot adhesive | No damage | No damage | ||
| 9 | Under water adhesive | No damage | No damage | ||
| 10 | UV radiation | No damage | No damage | ||
| 11 | Definite Elongation | No damage | No damage | ||
Way of Use
Certificate
The Exhibition
Warehouse
The Imported Raw Material
Automatic Line
FAQ:
1.Can u send sample to us ?
Yes, the sample is free to you to do the test.
2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.
3.Where is your port?
Guangzhou/Foshan
4.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.
5.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.
6.How many days to produce one 20'container?
Maxinum 15days
7.Can we visit factory?
Yes, warmly welcome to visit us at any time.
8.Documents ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.