Wide Used High Adhesive Acid Curing Silicone Sealant (363)
Characteristics:
1. One component
2. Fast acid curing, high strength
3. Non-discoloring.
4. Excellent adhesive for glass and most building materials.
5. Excellent resistance to low and high temperature, little performance changes between -10~120
Application:
1. Joint sealing for high-grade glass assembling.
2. Joint sealing for day lighting roof construction and great glass
3. Joint sealing of side window and rear window glass
4. Joint sealing for small aquarium and tank
5. Assembly for various kinds of windows and doors.
6. General joint and seal
Limitations:
1. Cannot be used as structural sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Unsuitable for the continuous flooding or entire-year moist places.
6. Cannot be used on the substrate surface below 6 centi degree or above 40 centi degree
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Color available:
Clear, white, grey, black, others of special order
Curing Time:
Track-free Time is between 5 to 15 minutes at room temperature
Completely curing Time is between 24 hours to 72 hours at room temperature.
Packaging:
Cartridge: 300 ml 24 cartridges/CTN
Gross weight: 340g Net weight: 280g
Storage and transportation:
12 months stored in a dry and ventilated place below 27 centi degree in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB/T 14683-2003
Testing Standard: GB/T 14683-2003
TECHNICAL DATA SHEET
| No | Item | The standard | Test result | ||
| 1 | Appearance | Have no grain, no agglomerations, no skinning, and no bubble. | Pass the standard | ||
| 2 | Density (g/cm3) | ±0.1 | 1.43 | ||
| 3 | Droop degree (mm) | Uprightness | ≤3 | 0 | |
| Level | No damage | No damage | |||
| 4 | Skinning time (h) | ≤3 | 0.4 | ||
| 5 | Elastic recovery ratio (%) | ≥80 | 97 | ||
| 6 | Extrusion ability (ml/min) | ≥80 | 113 | ||
| 7 | Tensile modulus (MPa) | 23ºC | >0.4 | 0.792 | |
| 8 | Cold-hot adhesive | No damage | No damage | ||
| 9 | Under water adhesive | No damage | No damage | ||
| 10 | UV radiation | No damage | No damage | ||
| 11 | Definite Elongation | No damage | No damage | ||
Certificate
The Exhibition
FAQ:
1.Can u send sample to us ?
Yes, the sample is free.
2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.
3.What's your guarantee?
10-15 years.
4.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.
5.How many days to produce one 20'container?
10-15days.
6.Can we visit factory?
Yes, warmly welcome to visit us at any time.
7.What are the documents we provide ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.